Menu
Your Cart

CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)

CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
Hot -50 %
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
CP2102 USB to TTL Module with DTR pin (Can work as Arduino Programmer)
  • Stock: In Stock
  • Brand: ElementzOnline
  • Model: CP2102_USB_TTL
  • Weight: 100.00g
  • SKU: CP2102_USB_TTL
Products Sold: 576
Product Views: 33462
₹199.00
₹399.00

Available Options

Package Contents
 
1 x CP2102 USB to TTL Module (Can be used as Arduino Programmer)
 
Product Details
 
CP2102 Based - Better and Faster than Cheap PL2303 based boards
 
USB specification 2.0 compliant with full-speed 12Mbps.
 
Supports all Windows (above Win 98), Mac OS (above 9) & Linux (above 2.x.x) versions
 
Baud rates: 300 bps to 1 Mbps.
 
Byte receive buffer: 640 byte transmit buffer.
 
Create virtual COM port and connect your old devices which use serial port communication
 
Compatible with both 3.3V & 5V levels
 
500mA self recovery fuse for protection
 
Two onboard data transmission and reception indicators to monitor data transfer status in real time
 
 Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that need power
 
Electrostatic package,insures the board will not be damaged before use
 
All handshaking and modem interface signals.
 
Hardware or X-On/X-Off handshaking supported.
 
Event character support Line break transmission.
 
USB suspend states supported via SUSPEND pins.
 
Temperature Range: -40 to +85 degree Celsius.
 
 
Applications
 
- Easily connect computer with all Micro-controller Units (MCU) (Supports 3.3V & 5V)
 
- Can be used to program Arduino boards using DTR pin along with TX, RX, GND and 5V or 3.3V
 
- All kinds of satellites set-top box upgrade
 
 - Router, HDD, ADSL, broad band modem firmware upgrade or cracked upgrade
 
- Cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash, etc
 
- Burn write STC MCU, NXP MCU, renesas MCU, NEC MCU, etc
 
- Simple UART communication, used in UART debugging tools like putty, hyper terminal, etc
 
- USB signal transferred to TTL signal, may be used by electronic enthusiasts

Write a review

Please login or register to review
Site uses Cookies
This site uses cookies to provide and improve your experience. By continuing to use this site, you agree to accept these cookies.