Search Criteria
Products meeting the search criteria
Brand: Element14
Model: RASPBERRYPI-DISPLAY
Description
The 7" Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal conversion. It is truly in..
₹9999.00 ₹12999.00
Brand: Multicomp
Model: CBPIHAT-BLK
Designed to house Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi 3 and HAT PCB'sHAT can be removed without removing the Raspberry Pi from the enclosureAll cut-outs are pre-cut into the caseCamera ribbon slot in enclosure lidDisplay ribbon slot in enclosure lidLabel recess on enclosure baseGloss finis..
₹599.00 ₹699.00
Brand: CamdenBoss
Model: CBRPC-CLR
The CBRPC-CLR is a crystal clear Camera Enclosure made of high impact polystyrene (HIPS) with acrylic capped ABS carbon fibre finish. This enclosure is designed to house the Raspberry Pi Camera via clip-in grooves (no screw required). This enclosure is an ideal for wall mounting.All cut-outs are pre..
₹799.00 ₹849.00
Brand: Element14
Model: PI-DESKTOP
The Element14 DIY Pi Desktop Kit is a kit of accessories that allow you to convert a Raspberry Pi 2 or Pi 3 into a desktop computer. The kit includes a case and an add on board, similar to a HAT, that plugs onto the 40 pin GPIO connector of the Raspberry Pi. This add on board contains a Real Time Cl..
₹3999.00 ₹4999.00
Brand: Others
Model: Voice Speech Recognition Module Kit
This Voice Recognition Module, which can recognize as much as 15 voice instruction and be suitable for most cases involving voice control. It receives configuration commands or responds through serial port interface. With this module, we can control cars or other electrical devices by voice. It can ..
₹2999.00 ₹3999.00
Brand: Waveshare
Model: 2.7-Inch-3-colour-E-Paper-Display-Hat-(B)-For-Raspberry-Pi
2.7Inch E-Paper Display is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display..
₹2999.00 ₹3999.00
Brand: Others
Model: MATRIX.C1.EU
Matrix Labs FPGA-driven Matrix Creator IoT daughter board for the Raspberry Pi 3 is loaded with sensors, 802.15.4 radios, and a mic array. The disc-shaped Matrix Creator add-on for the Raspberry Pi is based on AdMobilize's successfully Kickstartered Matrix home automation and surveillance hub. AdMob..
₹8499.00 ₹8999.00
Brand: Waveshare
Model: 7.5-inch-3-color-e-paper-hat-b-display-rpi
7.5Inch E-Paper Display Hat (B) is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide vi..
₹6999.00 ₹7999.00
Brand: Raspberry Pi
Model: RPI4-CM4-8GB-32GB
Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHzOnboard Gigabit Ethernet PHY supporting IEEE1588 USB 2.0 interfacePCIe Gen 2 x1 interfaceDual HDMI interface (up to 4Kp60 supported)The power of Raspberry Pi 4 in a compact form factor for deeply embedded applications. Raspberry ..
₹9999.00 ₹12999.00
Brand: Raspberry Pi
Model: Raspberry-Pi-Pico
Features:RP2040 microcontroller chip designed by Raspberry PiDual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz264KB of SRAM, and 2MB of onboard Flash memoryThe castellated module allows soldering directly to carrier boardsUSB 1.1 with device and host supportLow-power sleep..
₹349.00 ₹599.00
Brand: Raspberry Pi
Model: RPI-HQ-CAMERA
Product OverviewNew and improved official camera accessory for the Raspberry Pi. Delivering enhanced resolution and sensitivity alongside an interchangeable lens system it is ideal for use in both industrial and consumer/hobby applications.12.3MP high quality camera7.9mm diagonal image size CMOS ima..
₹5999.00 ₹7999.00
Brand: Raspberry Pi
Model: PoE HAT for Raspberry Pi 3 Model B+
The official Power over Ethernet (PoE) add-on board for the Raspberry Pi 3 Model B+. Use this HAT to power a Raspberry Pi via an Ethernet cable, removing the need for a separate power supply, an ideal solution for embedded and IoT projects. For Raspberry Pi 3 Model B+ and onwards, an 802.3af complia..
₹1999.00 ₹1999.00