This is a 0.96 inch OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. The package includes d..
PSoC 4 an ARM based PSoCPSoC 5LP programmer and debuggerPower supply systemBluetooth interfaceArduino compatible headersDigilent Pmod compatible heade..
Specifications:Input any USB Port Like: Computer/ Laptop/ Color TV/ Car/ Aeroplane/ Audio/ VideoCharging Time: 4 Hours (approx) on 5V-1AmpMicro USB In..
The Radxa ROCK 4C+ is a Single Board Computer (SBC) in a credit card sized form factor
packed with a wide range of class‑leading functionality, featu..
The Raspberry Pi 4 Model B is the latest addition to the popular Raspberry Pi range of computers, offers a significant increase in processor speed, ri..
STM32F0DISCOVERY helps to discover the STM32F0 Cortex-M0 features and to develop applications easily. It includes everything required for beginners an..
Manufacturer Product Page: https://store.arduino.cc/usa/arduino-uno-rev3
Download Arduino IDE & Drivers: https://www.arduino.cc/en/Main/Software
Product Overview
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 i..
e-tracker from Elementz is an Arduino compatible Sim808 based tracker board with multiple features.
Features:
SIM 808 based GSM/GNSS board
Quad-band 850/900/1800/1900MHz GSM
Supports GPS NMEA protocol
Arduino compatible with ATMEGA328 on board
SD card interfacing capacity
Bluetoot..
2.9 Inch E-Paper Module Printed Circuit Board is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it..
4.2Inch E-Paper Display Module is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for application..
E-Ink Display Module is a 1.54 Inch , 200x200 resolution, with embedded controller module. It is communicating via SPI interface and it supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for ap..
M2M Linker from Elementz is an Arduino compatible Sim800 based board with multiple features.
The M2M Linker features an ATmega328 and SIM800 which provides the flexibility of arduino along with the added features of SIM800 which has GSM and GPRS functionality. SIM800 is a complete Quad-band GSM/G..
Download Arduino IDE & Drivers: http://arduino.cc/en/Main/Software
Package Contents
1 x UNO R3 ARDUINO COMPATIBLE DEVELOPMENT BOARD
1 x USB A to B Cable
Product Details
This is the new Fully 100% compatible derivative version of Uno R3 based on current open source hardware.
..
This is the new derivative version of Uno R3 based on current open source hardware.
The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The o..
Description: It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). Arduino Pro Mini does not come with connectors populated so t..
Description: It's the Arduino compatible Pro Mini - SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). Arduino Pro Mini does not come with connectors populated so that you can solder..
Product OverviewThe Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP ..
The Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset butt..