This is a 0.96 inch OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. The package includes d..
PSoC 4 an ARM based PSoCPSoC 5LP programmer and debuggerPower supply systemBluetooth interfaceArduino compatible headersDigilent Pmod compatible heade..
Specifications:Input any USB Port Like: Computer/ Laptop/ Color TV/ Car/ Aeroplane/ Audio/ VideoCharging Time: 4 Hours (approx) on 5V-1AmpMicro USB In..
The Radxa ROCK 4C+ is a Single Board Computer (SBC) in a credit card sized form factor
packed with a wide range of class‑leading functionality, featu..
The Raspberry Pi 4 Model B is the latest addition to the popular Raspberry Pi range of computers, offers a significant increase in processor speed, ri..
STM32F0DISCOVERY helps to discover the STM32F0 Cortex-M0 features and to develop applications easily. It includes everything required for beginners an..
This IR PROXIMITY/ OBSTACLE SENSOR is designed to work with almost all ARDUINO boards and MICROCONTROLLERs - AVR, PIC, 8051, etc
Operating Voltage: 5V
MODE SELECTION - Configurable HIGH / LOW Output State (Using AH and AL pins)
Adjustable Range using preset (potentiometer on board)
Si..
Product DetailsIdeal for prototyping with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.Compatible with 2.54mm FEMALE Berg SticksCOLORS: RED, BLACK, GREEN, YELLOW, BLUE, GREY (Selected as per AVAILABILITY)Pin Pitch(End Connector Size): 2.54 mm (Standard Female Berg Connector Size)Gender: Male to Male&n..
Description:
Five Different Wired / Wireless Robots can be made using the same components
Features:
Complete DIY kit made from high quality cut metal and plastic components
Consist of 2 DC motors rated at 45 rpm , 9V
Can make five different bots out of the same ..
Included Components:
nRF Serial Adapter Board
nRF Serial Adapter for 2.4GHz Wireless Transceiver modules. Low cost and High speed data communication module. An alternative to XBee.
nRF Serial Adapter board allows you to plugin your nRF modules and communicate through Serial com..
This is a 2.4GHz Transceiver, communicate using SPI and has 250kbps, 1Mbps and 2Mbps on air data rate. It employs an nRF24L01+, a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. With peak RX/TX currents lower than 14mA, a..
RAK811 is a wireless transparent communications module, base on the Semtech SX1276. LoRa technology utilizes a spread spectrum modulation in the Sub-GHz band to enable long range (greater than 10 miles) coverage, low power consumption (up to 10 years battery power), high network capacity (up to 1 mi..
Package Contents
1 x RF Transmitter Module (RF ASK 433.92MHz)
1 x RF Receiver Module (RF ASK 433.92MHz)
Product Features
433.92 MHz ASK Transmitter and Receiver Modules to transmit and receive data with dazzling 500 meter range in open space.
..
Description:
RS485 CAN Shield from Waveshare is originally designed for NUCLEO/XNUCLEO Boards and all other Arduino compatible boards. This Shield will easily enable RS485 and CAN communication functions for your Arduino boards. Shield houses MAX3485 for the RS485 functionality and SN65HVD230 for..
Product Features
SOLDRON 25W Soldering Iron - The workhorse of electronic industries
- Maximum Temperature = 380 degree Celsius
- The most popular product
- General purpose for all electronic applications
- Continuous rated (24 hours)
- Attains full operating te..
This Two channel IR PROXIMITY/ OBSTACLE SENSOR is designed to work with almost all ARDUINO boards and MICROCONTROLLERs - AVR, PIC, 8051, etc
Operating Voltage: 5V
Adjustable Range using preset (potentiometer on board)
Since the sensor module works on INFRARED, for obstacles with r..