Search Criteria
Products meeting the search criteria
Hot
-10 %
Brand: Others
Model: 4ch-Relay-Board
Package Contents
1 x Four Channel 12V ULN2003 Based Relay Board Module
Product Overview
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has four..
₹179.00 ₹199.00
-15 %
Brand: Robosoft Systems
Model: X-C3S250-E
Description:
Papilio One board fully assembled with a Xilinx XC3S250E and 4Mbit SST SPI Flash memory. Specifications Power Four independent power rails at 5V, 3.3V, 2.5V, and 1.2V. Power supplied by a power connector or USB. USB Two channel USB connection for JTAG and serial communications i..
₹4490.00 ₹5299.00
-16 %
Brand: ElementzOnline
Model: FPGA-X-C3S500E
Description:
Papilio One board fully assembled with a Xilinx XC3S500E and 4Mbit SST SPI Flash memory.
Features:
Power :Four independent power rails at 5V, 3.3V, 2.5V, and 1.2V. Power supplied by a power connector or USB.
USB :Two channel USB connection for JTAG and seri..
₹5490.00 ₹6499.00
Pre-Order
Brand: Intel
Model: EDI2ARDUIN.AL.K
INTEL EDI2ARDUIN.AL.K Edison Board for Arduino with Arduino Sketch, Linux, Wi-Fi & Bluetooth Support
Product Overview
The Intel® Edison development platform is designed to lower the barriers to entry for a range of inventors, entrepreneurs, and consumer product designers to rapidly prototype and produce 'Internet of Things' (IoT) and wearable computing products.
Supports ..
₹14999.00
-20 %
Brand: ElementzOnline
Model: LCD_Serial_Converter
Overview
Data and commands can given serially with the help of some easy to use 'Attention commands' (AT commands). It is suitable for beginners and experts in the field of embedded system. Since it is operated through simple SERIAL communication in ASCII format, the module can be easil..
₹799.00 ₹999.00
-17 %
Pre-Order
Brand: NXP
Model: OM11043,598-mBed-LPC1768
Product Overview
OM11043 is an ARM LPC1768 board which allows to quickly and easily evaluate the LPC176x family of microcontrollers. The microcontroller, board, and accompanying features make it a great starting point for your next Cortex-M3 project. Populated with the LPC1768 to demonstrate LP..
₹4999.00 ₹5999.00
-3 %
In Stock
Brand: Others
Model: MOJO-V3
The Mojo is a FPGA development board that is designed from the ground up to be easy to use.
The Mojo is made in the USA.
The Mojo features include
Spartan 6 XC6SLX9 FPGA
84 digital IO pins
8 analog inputs
8 general purpose LEDs
1 reset button
1 LED to show when the FPGA i..
₹6799.00 ₹6999.00
-35 %
Brand: Others
Model: nano-v3
Product OverviewArduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a..
₹649.00 ₹999.00
Hot
-56 %
Brand: Others
Model: NODE-MCU
The NodeMcu is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines.
FEATURES
• Open-source
• Interactive
• Programmable
• Low cost
•&n..
₹399.00 ₹899.00
-44 %
Brand: Robosoft Systems
Model: LIPOLY-LOW-VOLTAGE-ALARM
Description:
Simple to use Lipoly low voltage alarm that is small and light for on board use, plugs into balance lead for detecting low voltage on individual cells. A loud alarm will sound and LED will change from Green to Red if any individual cell drops to 3.3v or below.
Features:
..
₹390.00 ₹699.00
Pre-Order
Brand: ElementzOnline
Model: Elementz-picboards
Suitable For all 40 pin ICS in the series PIC 18F and 16F..
₹249.00
Pre-Order
Brand: Element14
Model: PIFACE-DIGITAL-I/O EXPANDER
Description:
Raspberry Pi can totally hook up to all kinds of controls and sensors thanks to the PiFace Digital expansion board.
The PiFace Digital plugs directly into the GPIO port on your Raspberry Pi and adds a whole load of input and output capability. You can detect switch states, drive m..
₹4588.00