-13 %
Out Of Stock
Brand: Panasonic
Model: AMG8834EK
The AMG8834EK is a evaluation kit for high performance type low gain infrared array sensor Grid-EYE. The high precision infrared array sensor is based on advanced MEMS technology. It offers digital output (I2C) for thermal presence, direction and temperature values. The built-in lens includes a 60 d..
₹6999.00 ₹7999.00
-56 %
Brand: Robosoft Systems
Model: B-3-AC-LIPO-BAL-CHRGR
Description:
B3AC Compact Charger is a simple and compact Lipoly balance charger for 2~3s batteries. Featuring built-in JST-XH balance plug ports and 3 LEDs to indicate charge status the B3AC makes an ideal pocket-sized charger to keep with you.
Features:
Input: 110v or 240v..
₹529.00 ₹1200.00
-20 %
Brand: BeagleBoard
Model: BBONE-BLUE
BeagleBone® Blue is the affordable and complete robotics controller built around the popular BeagleBone® open hardware computer. Linux-enabled, Blue is community-supported and fully open-source. High-performance, flexible networking capabilities are coupled with a real-time capable Linux system and ..
₹7999.00 ₹9999.00
-14 %
Brand: Multicomp
Model: CBPIHAT-BLK
Designed to house Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi 3 and HAT PCB'sHAT can be removed without removing the Raspberry Pi from the enclosureAll cut-outs are pre-cut into the caseCamera ribbon slot in enclosure lidDisplay ribbon slot in enclosure lidLabel recess on enclosure baseGloss finis..
₹599.00 ₹699.00
-6 %
Pre-Order
Brand: CamdenBoss
Model: CBRPC-CLR
The CBRPC-CLR is a crystal clear Camera Enclosure made of high impact polystyrene (HIPS) with acrylic capped ABS carbon fibre finish. This enclosure is designed to house the Raspberry Pi Camera via clip-in grooves (no screw required). This enclosure is an ideal for wall mounting.All cut-outs are pre..
₹799.00 ₹849.00
-33 %
Brand: Others
Model: DS18B20
DS18B20 Waterproof Digital temperature sensor cable is very useful to measure temperature far away or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Since it is digital there wont be any signal degradation over long distance..
₹199.00 ₹299.00
-20 %
Pre-Order
Brand: Element14
Model: PI-DESKTOP
The Element14 DIY Pi Desktop Kit is a kit of accessories that allow you to convert a Raspberry Pi 2 or Pi 3 into a desktop computer. The kit includes a case and an add on board, similar to a HAT, that plugs onto the 40 pin GPIO connector of the Raspberry Pi. This add on board contains a Real Time Cl..
₹3999.00 ₹4999.00
-0 %
Brand: Others
Model: SS49E
The SS49E is a low-cost linear hall effect sensor IC in 3 pin TO-92 package. This small and versatile sensor is operated by a magnetic field from a permanent magnet or an electromagnet. It is designed and manufactured for cost competitiveness. The linear sourcing output voltage is set by the supply ..
₹199.00 ₹199.00
-25 %
Procured against Order
Brand: Others
Model: Voice Speech Recognition Module Kit
This Voice Recognition Module, which can recognize as much as 15 voice instruction and be suitable for most cases involving voice control. It receives configuration commands or responds through serial port interface. With this module, we can control cars or other electrical devices by voice. It can ..
₹2999.00 ₹3999.00
-25 %
Brand: Waveshare
Model: 2.7-Inch-3-colour-E-Paper-Display-Hat-(B)-For-Raspberry-Pi
2.7Inch E-Paper Display is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display..
₹2999.00 ₹3999.00
Hot
-49 %
Brand: Others
Model: 5V-3A-USB-to-microUSB
Product OverviewThis is a 5V 3A DC adaptor/ adapter for Raspberry Pi 3 / 2 / B+ / B / A+ / A with USB to microUSB CableProduct InformationOutput Voltage : 5V DC
Max Current: 3A
USB to microUSB Cable
Length: ~1 - 1.5m
USB to microUSB Switch Cable
Length: 1.5m..
₹279.00 ₹549.00
-50 %
Pre-Order
Brand: Others
Model: A9G PUDDING BOARD
The A9G development board is a multifunctional development board based on EMC’s A9G GPRS/ GSM + GPS/ BDS module, you can use it to verify the basic communication and peripheral functions of A9G module. It has the basic phone/ SMS, GPRS networking communications and GPG/ BDS dual mode positioning fun..
₹1499.00 ₹2999.00