This is a 0.96 inch OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. The package includes d..
PSoC 4 an ARM based PSoCPSoC 5LP programmer and debuggerPower supply systemBluetooth interfaceArduino compatible headersDigilent Pmod compatible heade..
Specifications:Input any USB Port Like: Computer/ Laptop/ Color TV/ Car/ Aeroplane/ Audio/ VideoCharging Time: 4 Hours (approx) on 5V-1AmpMicro USB In..
The Radxa ROCK 4C+ is a Single Board Computer (SBC) in a credit card sized form factor
packed with a wide range of class‑leading functionality, featu..
The Raspberry Pi 4 Model B is the latest addition to the popular Raspberry Pi range of computers, offers a significant increase in processor speed, ri..
STM32F0DISCOVERY helps to discover the STM32F0 Cortex-M0 features and to develop applications easily. It includes everything required for beginners an..
Product Overview The proposed security patrolling robot that uses night vision camera for securing any premises. The robotic vehicle moves at particular intervals and is equipped with night vision camera. It uses a predefined line to follow its path while patrolling. It stops at particular poin..
The NodeMcu is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines.
FEATURES
• Open-source
• Interactive
• Programmable
• Low cost
•&n..
Included Components:
nRF Serial Adapter Board
nRF Serial Adapter for 2.4GHz Wireless Transceiver modules. Low cost and High speed data communication module. An alternative to XBee.
nRF Serial Adapter board allows you to plugin your nRF modules and communicate through Serial com..
This is a 2.4GHz Transceiver, communicate using SPI and has 250kbps, 1Mbps and 2Mbps on air data rate. It employs an nRF24L01+, a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. With peak RX/TX currents lower than 14mA, a..
Product OverviewIn essence this project clubs in image processing and driving a robot autonomously with what visuals have been caught as has been in the case of Machine Vision projects. This project will be using a Raspberry Pi processor board for computational purpose and driving of the robot. The ..
Description
This OLED display unit is based on SSD1306 can self-illuminate, with
high resolution of 128 ∗ 64 and Viewing angle greater than 160 degree.
It is supported by many control chip: Fully compatible with Arduino,
8051 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power
co..
This 0.91” I2C OLED Display is an OLED monochrome 128×32 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. The driver IC is SSD1306 with the I2C interface. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages ..
Description:
Simple to use Lipoly low voltage alarm that is small and light for on board use, plugs into balance lead for detecting low voltage on individual cells. A loud alarm will sound and LED will change from Green to Red if any individual cell drops to 3.3v or below.
Features:
..
Features:
High performance RISC CPU.
o ONLY 35 simple word instructions.
o All single cycle instructions except for program branches which are two cycles.
o Operating speed: clock input (200MHz), instruction cycle (200nS).
..
Description:
Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer.
Product Overview:
Package in..
Description:
Polymorph is a thermoplastic material that can be shaped and reshaped any number of times.
Features:
It is normally supplied as granules that look like small plastic beads. In the classroom it can be heated in hot water and when it reaches 62 degrees centigrade the granul..
Description:
It is a fully assembled Proto Shield kit with mini bread board. It is very usefull when you need to make your own stuff to stick on an Arduino-sized outline.The board is polpulated with Switches ,LEDs for simple I/O operation and a mini bread board , which ca..