-14 %
Brand: Robosoft Systems
Model: DUMPSTER-ROBOT
Description:
The Bull Dozer Robot is basically a manually controlled platform which uses Caterpillar type track belt locomotion. It is quite evident from the name that it will be used for dumping purpose, therefore it has a bucket which is lifted with the help of a gear box. The gear box is..
₹2999.00 ₹3499.00
-33 %
Brand: ElementzOnline
Model: PJCT11
Description:
Dumpster Robot using Arduino and Bluetooth module can be used to grab large chunks of load from one place to another. It is meant for the purpose of grabbing from one end and dumping it at other end. It requires an android application for controlling its movements. The application in..
₹9999.00 ₹14999.00
Hot
-7 %
Brand: Others
Model: 8ch-RELAY-BOARD
Package Contents
1 x Eight Channel 12V ULN2803 Based Relay Board Module
Product Overview
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has eig..
₹279.00 ₹299.00
Hot
-50 %
Brand: Others
Model: 9V-1A-Adaptor
Product OverviewThis is a 9V 1A DC Power adapter/ adaptor.Product InformationPower Adapter
Output Voltage: 9V
Output Current (max) : 1A3 Months Manufacturer warranty..
₹149.00 ₹299.00
-58 %
Brand: ElementzOnline
Model: ESP-WROOM-32
Details:
ESP-WROOM-32 breakout board. The pins of ESP-WROOM-32 are extended for easy use.
The ESP-WROOM-32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding, music ..
₹999.00 ₹2399.00
Hot
-20 %
Brand: Others
Model: ESP8266-WiFi
Product Description
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functiESP8266 remote serial Port WI..
₹199.00 ₹249.00
Hot
-20 %
Brand: ElementzOnline
Model: ESP12Breakout
Details:
ESP8266-ESP12E breakout board. The pins of ESP12E are extended for easy use...
₹399.00 ₹499.00
-20 %
Brand: Others
Model: ESP8266-ESP12E
Specifications:
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
+19.5dBm output power in 802.11b mode
Po..
₹199.00 ₹249.00
Hot
-20 %
Brand: Others
Model: FF-Jumper-Wire
Product Details
Ideal for prototyping with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.
Compatible with 2.54mm MALE Berg Sticks
COLORS: RED, BLACK, GREEN, YELLOW, BLUE, GREY (Selected as per AVAILABILITY)
Pin Pitch(End Connector Size): 2.54 mm (Standard Female Berg Connector Size)
Gende..
₹4.00 ₹5.00
/WID1982-250x250.jpg "Finger Print Sensor (R305) -TTL UART")
/R305-optical-Finger-Print-Module-reader-scanner-robot-module-For-Arduino-Raspberry-Pi-Robotics-buy-in-india-buysnip-com-3-250x250w.jpg "Finger Print Sensor (R305) -TTL UART")
-10 %
Brand: Others
Model: R305
This is a fingerprint sensor module with TTL UART interface. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person. The fingerprint module can directly interface with 3v3 or 5v Microcontroller. A level converter (like MAX232) is req..
₹1799.00 ₹1999.00
-21 %
Brand: Others
Model: FLEX-SENSOR-2.2
Description:
A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases i.e the resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Connector is 0.1" spaced and bread board frie..
₹549.00 ₹699.00
-38 %
Brand: ElementzOnline
Model: PJCT43
Description:
Flex sensor Based hand gesture controlled all terrain robot using Arduino UNO & Bluetooth is used to control the movements of robot using flex sensors attached superficially over a glove which can then be worn on our hand. Flex sensors are placed on the fingers and the movem..
₹12500.00 ₹20000.00