This is a 0.96 inch OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. The package includes d..
PSoC 4 an ARM based PSoCPSoC 5LP programmer and debuggerPower supply systemBluetooth interfaceArduino compatible headersDigilent Pmod compatible heade..
Specifications:Input any USB Port Like: Computer/ Laptop/ Color TV/ Car/ Aeroplane/ Audio/ VideoCharging Time: 4 Hours (approx) on 5V-1AmpMicro USB In..
The Radxa ROCK 4C+ is a Single Board Computer (SBC) in a credit card sized form factor
packed with a wide range of class‑leading functionality, featu..
The Raspberry Pi 4 Model B is the latest addition to the popular Raspberry Pi range of computers, offers a significant increase in processor speed, ri..
STM32F0DISCOVERY helps to discover the STM32F0 Cortex-M0 features and to develop applications easily. It includes everything required for beginners an..
Product OverviewIt is Breakout board for the Analog Device's ADXL345 Triple axis accelerometer with Voltage regulator onboard. The module is populated with MOSFET based Voltage level conversion circuitry to enable you to interface different type of microcontrollers (3V3 & 5V) . Apart from the ab..
The Three Axis Acceleration + Gyro Breakout (MPU-6050) is a great motion processing module. By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, ..
Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.
Working Voltage : 5V(DC)
Static current: Less than 2mA.
Output signal : Electric frequency signal, high level 5V, low level 0V.
Sensor angle : Not more than 15 degrees.
Detection distance : 2cm-450cm.
High precision : Up to 2mm
..
Overview: The ultrasonic interface board uses the ultrasonic sensor HC-SR04 and process the sensor output to provide the distance output serially.Just give supply and take the out put. No need of triggering the sensor and processing the sensor output. Features:&..
The basic concept of IR(infrared) obstacle detection is to transmit the IR signal(radiation) in a direction and a signal is received at the IR receiver when the IR radiation bounces back from a surface of the object. Features: *There is an obstacle, the green indicator light on the circuit board *Di..
Description:The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, micro controller system to complete the Micro SD card read and write files. Users can directly use the Arduino IDE comes with an SD card to complete the library..
The Minisense 100 is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back an forth. A simple resistor sho..
1 x Small passive buzzer module1 x 2-color LED module 1 x Hit sensor module 1 x Vibration switch module 1 x Photo resistor module 1 x Key switch module 1 x Tilt switch module 1 x 3-color full-color LED SMD modules 1 x Infrared emission sensor module 1 x 3-color LED mod..
Thermoelectric peltier cooler or generator tec1-12706,12V 92WCreate a temperature differential on each sideOne side gets hot and the other side gets coolPackage Content: 1 Peltire..
Working voltage: DC 5V Static working current: 5mAWorking current: 30mA Acoustic emission frequency:40KHzWiring:+5V(positive); Trig(control); Echo(receive); GND(cathode)This module uses the simple method, a control port with a 10US above high level, can wait for high level output at the receiving po..
MLX90614ESF-BAA-000-TU-ND is an infrared thermometer for non-contact temperature measurements. It can use with any microcontroller that can communicate with it through it's I2C interface. Features:Easy to integrateMounted on a breakout board with two types of pins10k Pull up resistors..