Brand: Others
Model: GSMQ2
Description:
Sensitive material of gas sensor is SnO2 with lower conductivity in clean air. When combustible gas exists, the sensor conductivity rises with gas concentration. MQ-2 gas sensor is sensitive to LPG, i-butane, propane, methane, alcohol, hydrogen and smoke. It could be used in gas..
₹99.00
Brand: Others
Model: GSMQ-3
Description:
The Gas Sensor(MQ3) module is useful for gas leakage detection (in home and industry). It is suitable for detecting Alcohol, CH4, Hexane, LPG, CO. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible.
Features:
High sensitivity to..
₹149.00
Brand: Others
Model: GSMQ-6
Description:
This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm.This sensor has a high sensitivity and fast response time. Th..
₹99.00
-35 %
Brand: Others
Model: nano-v3
Product OverviewArduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a..
₹649.00 ₹999.00
Hot
-56 %
Brand: Others
Model: NODE-MCU
The NodeMcu is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines.
FEATURES
• Open-source
• Interactive
• Programmable
• Low cost
•&n..
₹399.00 ₹899.00
-66 %
Brand: Others
Model: nRF24L01-2.4GHz-transceiver
This is a 2.4GHz Transceiver, communicate using SPI and has 250kbps, 1Mbps and 2Mbps on air data rate. It employs an nRF24L01+, a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. With peak RX/TX currents lower than 14mA, a..
₹129.00 ₹375.00
-42 %
Brand: Others
Model: OLED
Description
This OLED display unit is based on SSD1306 can self-illuminate, with
high resolution of 128 ∗ 64 and Viewing angle greater than 160 degree.
It is supported by many control chip: Fully compatible with Arduino,
8051 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power
co..
₹349.00 ₹599.00
New
-10 %
Brand: Others
Model: OLED-0.91inch
This 0.91” I2C OLED Display is an OLED monochrome 128×32 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. The driver IC is SSD1306 with the I2C interface. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages ..
₹269.00 ₹299.00
Pre-Order
Brand: Others
Model: USBPICPROG
Package Contents
1 x USBPICPROG PIC USB ICSP Programmer
5 x Female to Female Jumper Wires
1 x Container Box
Download Drivers, Software & User Manual from the links given below :
Driver : www.elementzonline.com/downloads/PIC_USB_Programmer/elementz..
₹799.00
Hot
-78 %
Brand: Others
Model: PIEZO-ELEMENT-20mm
Description:
Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer.
Product Overview:
Package in..
₹29.00 ₹129.00
-35 %
Brand: Others
Model: PROTO-SHIELD-BB
Description:
It is a fully assembled Proto Shield kit with mini bread board. It is very usefull when you need to make your own stuff to stick on an Arduino-sized outline.The board is polpulated with Switches ,LEDs for simple I/O operation and a mini bread board , which ca..
₹519.00 ₹799.00
Brand: Others
Model: PROTOTYPE-SHIELD-RASPBERRY-PI
Description:
The Newest Prototype Shield for Raspberry Pi is researched and produced by Harbin Alseon Robotics Technology Co., Ltd.. This kind of Raspberry Pi Prototype Shield is using double-sided Gold-plated PCB processing technology, the motherboard golden circular pad for easy welding c..
₹999.00