-42 %
Brand: Others
Model: OLED
Description
This OLED display unit is based on SSD1306 can self-illuminate, with
high resolution of 128 ∗ 64 and Viewing angle greater than 160 degree.
It is supported by many control chip: Fully compatible with Arduino,
8051 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power
co..
₹349.00 ₹599.00
New
-10 %
Brand: Others
Model: OLED-0.91inch
This 0.91” I2C OLED Display is an OLED monochrome 128×32 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. The driver IC is SSD1306 with the I2C interface. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages ..
₹269.00 ₹299.00
-44 %
Brand: Robosoft Systems
Model: LIPOLY-LOW-VOLTAGE-ALARM
Description:
Simple to use Lipoly low voltage alarm that is small and light for on board use, plugs into balance lead for detecting low voltage on individual cells. A loud alarm will sound and LED will change from Green to Red if any individual cell drops to 3.3v or below.
Features:
..
₹390.00 ₹699.00
Brand: Arduino
Model: Arduino-Cam
Details:
Model: OV7670
High sensitivity for low-light operation. Low operating voltage for embedded application
Standard SCCB interface compatible with I2C interface. Raw RGB, RGB (GRB4:2:2, RGB565/555/444),YUV(4:2:2) and YCbCr(4:2:2)output format
Support VGA, CIF and from CIF to 4..
₹950.00
Pre-Order
Brand: ElementzOnline
Model: Elementz-picboards
Suitable For all 40 pin ICS in the series PIC 18F and 16F..
₹249.00
Pre-Order
Brand: Others
Model: USBPICPROG
Package Contents
1 x USBPICPROG PIC USB ICSP Programmer
5 x Female to Female Jumper Wires
1 x Container Box
Download Drivers, Software & User Manual from the links given below :
Driver : www.elementzonline.com/downloads/PIC_USB_Programmer/elementz..
₹799.00
-40 %
Brand: MICROCHIP
Model: PIC-16F-877
Features:
High performance RISC CPU.
o ONLY 35 simple word instructions.
o All single cycle instructions except for program branches which are two cycles.
o Operating speed: clock input (200MHz), instruction cycle (200nS).
..
₹299.00 ₹499.00
Hot
-78 %
Brand: Others
Model: PIEZO-ELEMENT-20mm
Description:
Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer.
Product Overview:
Package in..
₹29.00 ₹129.00
Pre-Order
Brand: Element14
Model: PIFACE-DIGITAL-I/O EXPANDER
Description:
Raspberry Pi can totally hook up to all kinds of controls and sensors thanks to the PiFace Digital expansion board.
The PiFace Digital plugs directly into the GPIO port on your Raspberry Pi and adds a whole load of input and output capability. You can detect switch states, drive m..
₹4588.00
-33 %
Pre-Order
Brand: Robosoft Systems
Model: POLYMORPH
Description:
Polymorph is a thermoplastic material that can be shaped and reshaped any number of times.
Features:
It is normally supplied as granules that look like small plastic beads. In the classroom it can be heated in hot water and when it reaches 62 degrees centigrade the granul..
₹999.00 ₹1500.00
-35 %
Brand: Others
Model: PROTO-SHIELD-BB
Description:
It is a fully assembled Proto Shield kit with mini bread board. It is very usefull when you need to make your own stuff to stick on an Arduino-sized outline.The board is polpulated with Switches ,LEDs for simple I/O operation and a mini bread board , which ca..
₹519.00 ₹799.00
Brand: Others
Model: PROTOTYPE-SHIELD-RASPBERRY-PI
Description:
The Newest Prototype Shield for Raspberry Pi is researched and produced by Harbin Alseon Robotics Technology Co., Ltd.. This kind of Raspberry Pi Prototype Shield is using double-sided Gold-plated PCB processing technology, the motherboard golden circular pad for easy welding c..
₹999.00