-17 %
Brand: Others
Model: 2.9-inch-e-paper-module-printed-circuit-board
2.9 Inch E-Paper Module Printed Circuit Board is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it..
₹2499.00 ₹2999.00
-20 %
Brand: Waveshare
Model: 4.2-Inch-E-Paper-Display-Module
4.2Inch E-Paper Display Module is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for application..
₹3999.00 ₹4999.00
-13 %
Brand: Waveshare
Model: 7.5-inch-e-paper-hat-display-rpi
7.5Inch E-Paper Display is an E-Ink display HAT for Raspberry Pi,7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle,clear display without electricity, it is an ideal choice for applic..
₹6999.00 ₹7999.00
-33 %
Brand: Waveshare
Model: E-Ink-display-module-1.54-inch-200x200
E-Ink Display Module is a 1.54 Inch , 200x200 resolution, with embedded controller module. It is communicating via SPI interface and it supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for ap..
₹1999.00 ₹2999.00
-20 %
Brand: ElementzOnline
Model: M2M Linker V1.0
M2M Linker from Elementz is an Arduino compatible Sim800 based board with multiple features.
The M2M Linker features an ATmega328 and SIM800 which provides the flexibility of arduino along with the added features of SIM800 which has GSM and GPRS functionality. SIM800 is a complete Quad-band GSM/G..
₹1999.00 ₹2499.00
Hot
-17 %
Pre-Order
Model: RPi3-KIT
Included Components:
Raspberry Pi 3 Model B
Case For Raspberry Pi 3 Model B (As per choice)
16GB / 32GB / 64GB microSD Card Class 10 with NOOBS preinstalled (Sony / Sandisk / Strontium)
5 Volt 2A / 2.4A / 2.5A / 3 APower Supply for Rpi power..
₹4999.00 ₹5999.00
Hot
-13 %
Pre-Order
Brand: Raspberry Pi
Model: RASP-PI-ZERO-W
DESCRIPTION
The Raspberry Pi Zero W takes the beloved and extremely popular Pi Zero and adds wireless LAN and Bluetooth, making it perfect for embedded Internet of Things projects. It’s a tiny, low cost, low power mini computer with mini-HDMI, and the same 40-pin GPIO that all oth..
₹3499.00 ₹3999.00
Hot
-20 %
Brand: Others
Model: UNO_R3_Clone
Download Arduino IDE & Drivers: http://arduino.cc/en/Main/Software
Package Contents
1 x UNO R3 ARDUINO COMPATIBLE DEVELOPMENT BOARD
1 x USB A to B Cable
Product Details
This is the new Fully 100% compatible derivative version of Uno R3 based on current open source hardware.
..
₹799.00 ₹999.00
New
-20 %
Brand: Others
Model: UNO_R3_CP2102
This is the new derivative version of Uno R3 based on current open source hardware.
The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The o..
₹799.00 ₹999.00
-42 %
Brand: Arduino
Model: ARDUINO-PRO-MINI
Description: It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). Arduino Pro Mini does not come with connectors populated so t..
₹1449.00 ₹2499.00
-50 %
Brand: Others
Model: GS-MQ135
OverviewSensitive for benzene, alcohol, smokeOutput voltage boosts along with the concentration of the measured gases increasesFast response and recoveryAdjustable sensitivitySignal output indicatorSpecificationsPower: 2.5V ~ 5.0VDimension: 40.0mm * 21.0mmMounting holes size: 2.0mmApplicationsAir qu..
₹199.00 ₹399.00
-2 %
Brand: Others
Model: Pro-Mini-5V-16MHz
Description: It's the Arduino compatible Pro Mini - SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). Arduino Pro Mini does not come with connectors populated so that you can solder..
₹489.00 ₹499.00