HC-SR501 PYROELECTRIC INFRARED PIR MOTION SENSOR

Product Code: HC-SR501
Availability: In Stock
Rs119.00 Rs99.00

100 or more Rs85.00
500 or more Rs80.00
Qty:       

- Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.

The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a domb shaped Fresnel lens.

100% Brand New and High Quality

Color: White + Green

Infrared Sensor with Control Circuit Board

The Sensitivity and Holding Time Can be Adjusted

Working Voltage Range: DC 4.5V- 20V

Current Drain: <60uA

Detection Range: <140°

Voltage Output: High/Low level Signal: 3.3V TTL output

Detection Distance: 3 to 7m (can be adjusted)

Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)

Blockade time: 2.5s (Default)

Trigger: L: Non-repeatable trigger H: Repeat Trigger (Default)

Work temperature: -20-+80°C

Trigger Method: L Unrepeatable Trigger / H Repeatable Trigger

Material: Mixed Material

Dimension: 3.2cm x 2.4cm x 1.8cm (Approx)

Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)

Time Setting: Turn to Right, Time Increases (About 300S); Turn to Left, Time Reduce (About 5S).

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good