HC-SR04 ULTRASONIC SENSOR MODULE

Product Code: HC-SR04
Availability: In Stock
Rs119.00 Rs99.00

100 or more Rs85.00
500 or more Rs80.00
Qty:       
  • Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.
  • Working Voltage : 5V(DC)
  • Static current: Less than 2mA.
  • Output signal : Electric frequency signal, high level 5V, low level 0V.
  • Sensor angle : Not more than 15 degrees.
  • Detection distance : 2cm-450cm.
  • High precision : Up to 2mm
  • Input trigger signal : 10us TTL impulse
  • Echo signal : output TTL PWL signal

HC-SR04 ultrasonic module can offer non-contact distance sensing function, the range of which is 2cm to 400cm, and the range accuracy is up to 2mm. The module includes ultrasonic transmitter, receiver and control circuit.

The basic operation principle is below :

use IO port TRIG to trigger ranging. It needs 10 us high level signal at least

Module will send eight 40kHz square wave automatically, and will test if there is any signal returned.

If there is signal returned, output will be high level signal via IO port ECHO. The duration of the high level signal is the time from transmitter to receiving with the ultrasonic.

Testing distance = duration of high level*sound velocity(340m/s) / 2

You can use the above calculation to find the distance between the obstacle and the ultrasonic module.

NOTE : The module has a blind spot of 2cm(very near). So obstacle held too closely will not be detected. 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good