This is a 0.96 inch OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. The package includes d..
PSoC 4 an ARM based PSoCPSoC 5LP programmer and debuggerPower supply systemBluetooth interfaceArduino compatible headersDigilent Pmod compatible heade..
Specifications:Input any USB Port Like: Computer/ Laptop/ Color TV/ Car/ Aeroplane/ Audio/ VideoCharging Time: 4 Hours (approx) on 5V-1AmpMicro USB In..
The Radxa ROCK 4C+ is a Single Board Computer (SBC) in a credit card sized form factor
packed with a wide range of class‑leading functionality, featu..
The Raspberry Pi 4 Model B is the latest addition to the popular Raspberry Pi range of computers, offers a significant increase in processor speed, ri..
STM32F0DISCOVERY helps to discover the STM32F0 Cortex-M0 features and to develop applications easily. It includes everything required for beginners an..
Description:
Flex sensor Based hand gesture controlled robot using Arduino UNO & RF module is used to control the movements of robot using flex sensors attached superficially over a glove which can then be worn on our hand. Flex sensors are placed on the fingers and the movement of the f..
Description:
Flex sensor Based hand gesture controlled robot using Arduino UNO & Bluetooth is used to control the movements of robot using flex sensors attached superficially over a glove which can then be worn on our hand. Flex sensors are placed on the fingers and the movement of the f..
Description:
This is a basic, 4-digit 7-segment display - red in color. It has a common anode. The display features one decimal point per digit. The LED segments of the display require current-limiting resistors when powered from a 5 V logic pin. The value of the resistor is typically betwee..
Description:
Papilio One board fully assembled with a Xilinx XC3S500E and 4Mbit SST SPI Flash memory.
Features:
Power :Four independent power rails at 5V, 3.3V, 2.5V, and 1.2V. Power supplied by a power connector or USB.
USB :Two channel USB connection for JTAG and seri..
Description:
GPS tracker for Alzheimer's patient helps to track the location of patient in case if they move out of the safe zone. If the location is changed out of safe zone then message is sent via GSM modem regarding location of patient. This system is all integrated into Arduino UNO.
..
Description:
HM-10 is a Bluetooth V4.0 BLE version.In general,HM Bluetooth module use CSR BlueCore or TI CC2540, Master and slave roles in one, transmission version and remote control version and PIO state acquisition functions in one, Support the AT command modify module parameters, Convenient ..
Description:
It is a BLE (low energy bluetooth) module.
Features:
Bluetooth protocol: Bluetooth Specification V4.0 BLE receives no byte limit Iphone 4s under open environment and can achieve 110 m long distance communication
TI#39;s CC2541 chip configuration 256Kb space fol..
Description:
Human Follower Robot using Arduino UNO can follow a human effectively. Ultrasonic sensor like an 'eye' is used here to detect human being. The sensor is used to measure the distance of the human being from the robot. Arduino UNO is used to navigate the robot toward..
Product OverviewThe main advantage of Image Processing Based Fire Detection System is the early warning benefit. This system can be installed just about any where in a commercial building, malls and at many more public places for fire detection. This system uses camera for detecting fires. SO we do ..
Description:
Intelligent Street Lighting is all about fully automated control of street lights across your street based on daylight. This design eliminates the need for any manual intervention of switching street lights ON/OFF. This is so possible with the help of an LDR(Light Dependent Resistor)..
Description:
IoT based smart parking notification notifies you all about the occupied and vacant parking slots in a parking lot. The notification can be accessed using an android application. The system makes use of MQTT protocol to access the cloud server to upload real time data. The syst..
Description:
IoT based tide level detection system presents the implementation of a low cost prototype of a high tide detection system , at significantly smaller laboratory scale. This arduino based system uses an ultrasonic sensor to measure the height of tides. RGB led is used to indicate the..