This is a 0.96 inch OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. The package includes d..
PSoC 4 an ARM based PSoCPSoC 5LP programmer and debuggerPower supply systemBluetooth interfaceArduino compatible headersDigilent Pmod compatible heade..
Specifications:Input any USB Port Like: Computer/ Laptop/ Color TV/ Car/ Aeroplane/ Audio/ VideoCharging Time: 4 Hours (approx) on 5V-1AmpMicro USB In..
The Radxa ROCK 4C+ is a Single Board Computer (SBC) in a credit card sized form factor
packed with a wide range of class‑leading functionality, featu..
The Raspberry Pi 4 Model B is the latest addition to the popular Raspberry Pi range of computers, offers a significant increase in processor speed, ri..
STM32F0DISCOVERY helps to discover the STM32F0 Cortex-M0 features and to develop applications easily. It includes everything required for beginners an..
Overview
Bluetooth-Bee module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. It is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR ..
Package Contents
1 x CP2102 USB 2.0 to Serial RS232 + TTL UART Converter Module1 x USB A to B Cable (Optional)
Download Drivers from https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers#software
Product Details
..
CP2102 Module
3.3V USB to TTL Serial Converter. Use this device to connect your PC to a serial (TTL level) device. Uses CP2102 chipset and has a standard 0.1" pitch terminal strip to connect directly to UART or I/O pins for easy access to your MCU. You can use this to program your Arduino Mi..
Package Contents
1 x Acrylic Robotic Base
1 x Acrylic Platform
2 x BO Motor
2 x BO Motor Wheel
2 x BO Motor Clamp
1 x Castor Wheel
4 x Sleeve (40mm)
6 x Sleeve (15mm)
7 x Screw + Nuts (M3 x 50mm)
8 ..
LCD DisplayProduct OverviewThis project
is aimed towards developing a prototype of drowsiness detection system. This system is a real
time system which captures image continuously and measures the state of the eye according to
the specified algorithm and gives warning if required.
Though there a..
Description:
This robot is controlled using DTMF (Dual Tone Multiple Frequency). With the help of a mobile phone, you can control the motion of the robot. The heart if the robot is an Arduino Uno board.
Kit Contents:
DIY Kit
Assembled a..
Description:
Dumpster Robot using Arduino and Bluetooth module can be used to grab large chunks of load from one place to another. It is meant for the purpose of grabbing from one end and dumping it at other end. It requires an android application for controlling its movements. The application in..
Details:
ESP-WROOM-32 breakout board. The pins of ESP-WROOM-32 are extended for easy use.
The ESP-WROOM-32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding, music ..
Description:
Flex sensor Based hand gesture controlled all terrain robot using Arduino UNO & Bluetooth is used to control the movements of robot using flex sensors attached superficially over a glove which can then be worn on our hand. Flex sensors are placed on the fingers and the movem..
Description:
Flex sensor Based hand gesture controlled all terrain robot using Arduino UNO & ZigBee is used to control the movements of robot using flex sensors attached superficially over a glove which can then be worn on our hand. Flex sensors are placed on the fingers and the mov..
Description:
Flex sensor Based hand gesture controlled robot using Arduino UNO & ZigBee is used to control the movements of robot using flex sensors attached superficially over a glove which can then be worn on our hand. Flex sensors are placed on the fingers and the movement of the..