This is a 0.96 inch OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. The package includes d..
PSoC 4 an ARM based PSoCPSoC 5LP programmer and debuggerPower supply systemBluetooth interfaceArduino compatible headersDigilent Pmod compatible heade..
Specifications:Input any USB Port Like: Computer/ Laptop/ Color TV/ Car/ Aeroplane/ Audio/ VideoCharging Time: 4 Hours (approx) on 5V-1AmpMicro USB In..
The Radxa ROCK 4C+ is a Single Board Computer (SBC) in a credit card sized form factor
packed with a wide range of class‑leading functionality, featu..
The Raspberry Pi 4 Model B is the latest addition to the popular Raspberry Pi range of computers, offers a significant increase in processor speed, ri..
STM32F0DISCOVERY helps to discover the STM32F0 Cortex-M0 features and to develop applications easily. It includes everything required for beginners an..
Product OverviewThe ATMEGA Project Board is designed to work with ATMEGA16/32. The ATMEGA16/32 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It executes powerful instructions in a single clock cycle and achieves throughputs approaching 1 MIPS per MHz allowing..
Product OverviewThe ATMEGA162/ATMEGA162V Project Board is designed to work with ATMEGA162/ATMEGA162V. The ATmega162 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega162 achieves throughputs ap..
Product OverviewIn todays world, there is a continuous need for automatic appliances .The objective of this project is to make a Arduino based model to count number of persons visiting in a room and accordingly lighting up the room automatically.Here, two ir sensors are used into the controller to c..
Package Contents
1 x AVR 28pin ATMEGA8/48/88/168/328 PROJECT BOARD with ISP
1 x ATMEGA8A/ATMEGA328/ATMEGA328P MICROCONTROLLER IC (on board) if selected
1 x 8MHz Crystal Oscillator (on board soldered)
1 x RESET SWITCH (on board soldered)
OTHER BASIC COMPONENTS and BERG S..
The JTAG interface is a 4-wire Test Access Port (TAP) controller that is compliant with the IEEE 1149.1 standard. The IEEE standard was developed to enable a standard way to efficiently test circuit board connectivity (Boundary Scan). Atmel AVR devices have extended this functionality to i..
The JTAG interface is a 4-wire Test Access Port (TAP) controller that is compliant with the IEEE 1149.1 standard. The IEEE standard was developed to enable a standard way to efficiently test circuit board connectivity (Boundary Scan). Atmel AVR devices have extended this functionality to i..
Description:
Bluetooth based Accelerometer controlled robot controls the movements of the wheels of the robot using an accelerometer provided as input to Arduino. This system is comprised of a transmitter and receiver section. The transmitter section takes in accelerometer inputs and pa..
Description:
Bluetooth Controlled Omni-Directional Robot consists of a robot designed with four meccanum wheels all arranged at right angles to each other. This helps in movement of the robot in any possible direction (other than forward,backward ,left and right movements, it also enables diagona..
Description:
Bluetooth Controlled Pick and Place Robot consists of a sprocket wheeled robot fitted with a gripper module. This robot can pick things using gripper module from one place, perform all sorts of robotic movements and place the commodities picked to another place. The robot is interfac..
Description:
A bluetooth controlled robot using Arduino board and Android Phone.The robot motion can be controlled by giving commands through an application developed especially for the android phone. By providing commands through the app various robotic movements are possible.
&..