Buy Convertors and Interface boards for Arduino Raspberry pi and other embedded boards
Hot
Brand: ElementzOnline
Model: 2ch-Relay-Board-opto
Description:
An electrically operated switch which is simple and convenient to provide a voltage of 5V. This can drive upto two devices/equipments through each channel. Elementz relay board with on board optocoupler provides maximum electrical isolation possible. It isolates the low power co..
₹149.00
Out Of Stock
Brand: ElementzOnline
Model: IR-SENSOR-002
This Two channel IR PROXIMITY/ OBSTACLE SENSOR is designed to work with almost all ARDUINO boards and MICROCONTROLLERs - AVR, PIC, 8051, etc
Operating Voltage: 5V
Adjustable Range using preset (potentiometer on board)
Since the sensor module works on INFRARED, for obstacles with r..
₹129.00
-20 %
Brand: Others
Model: IC_ULN2003A
Features:
500-mA-Rated Collector Current (Single Output)
High-Voltage Outputs: 50 V
Output Clamp Diodes
Inputs Compatible With Various Types of Logic
Relay-Driver Applications
Applications:
Relay Drivers
Stepper and DC Brushed Motor Driv..
₹20.00 ₹25.00
Brand: Others
Model: ICULN2003
Features:
500-mA-Rated Collector Current (Single Output)
High-Voltage Outputs: 50 V
Output Clamp Diodes
Inputs Compatible With Various Types of Logic
Relay-Driver Applications
Compatible with ULN2800A Series
Applications:
Relay..
₹30.00
Brand: ElementzOnline
Model: URFR-01
Also give output in RS232, UART and Weigand data formats
Buzzer indication for card detection..
₹799.00
Brand: ElementzOnline
Model: Elementz-usb2rs485
Description
USB to RS485 converter is a handy tool to be used in projects and applications with two-way Master-Slave communication with multiple slaves in connected in the same bus, which is not possible with RS232 communication standard. Data can be transmitted upto 1200 meters according RS485 s..
₹425.00
Brand: ElementzOnline
Model: WTV-040-BRD
p { margin-bottom: 0.25cm; line-height: 120%; }
Product description
1 x WTV040 Sound Record & Play back module (onboard plug in)
1 x Sound Recorder adapter board (onboard)
1x Address selection, play back and control header (on board soldered)
1 x (3.3 V regulator cir..
₹899.00
-38 %
Pre-Order
Brand: Digi International
Model: XBEE-1-MW-TRACE
Description:
This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really..
₹1849.00 ₹2999.00
-39 %
Pre-Order
Brand: Digi International
Model: XBEE-1-MW-CONNECTION-SERIES-1
Description:
This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers..
₹1826.00 ₹2999.00
-46 %
Pre-Order
Brand: Digi International
Model: XBEE-2-MW-RPSMA
Description:
This is the XBee XB24-Z7SIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microc..
₹2699.00 ₹4999.00
-35 %
Pre-Order
Brand: Digi International
Model: XBEE-865-868
Description:
The XBee 868LP is an 868 MHz RF module for Europe. It is a high-performance, low-power module available at an extremely competitive price point. The XBee 868LP RF module can run either a proprietary DigiMesh® or point-to-multipoint networking protocol utilizing a low-power Energy..
₹1950.00 ₹2999.00
-29 %
Pre-Order
Brand: Digi International
Model: XBEE-PRO-50-MW-RPSMA
Description:
This is the XBee XBP24-BZ7PIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and si..
₹3541.00 ₹4999.00