6
27576
This post is intended to show how to set up a data connection over SIM7600 with Raspberry pi using QMI protocol.
QMI is a binary protocol designed to..
0
6377
This post is intended to show how to set up a data connection over the MBIM interface using libmbim and driver cdc_mbim in Linux.There is a open sou..
0
1422
Frequent sanitization of hand has become critical to be safe and healthy. As a preventive measure to tackle this situation, we have released the ..
0
22004
The emitter is an IR LED and the detector is an IR photodiode. The IR photodiode is sensitive to the IR light emitted by an IR LED.This is the..
0
34238
RFID stands for radio frequency identification and it basically uses the radio waves to read the information on the tag. The RFID tags contains the em..
0
5877
Here we will demonstrate how to interface the 8x8 LED matrix module with Arduino UNO while using the MAX7219 LED driver. The MAX7219 LED driver can be..
0
7400
Here we will be seeing an example of wireless control of devices using RF technology. This system utilizes the RF module (Tx/Rx) for doing wireless co..
1
8436
This post is intended to help readers to use the GPS antenna with SIM7600EI 4G GSM Modem for determining the GPS location and thus will get the user’s..
3
52957
Ultrasonic Sensor HC-SR04 is a sensor that can measure distance. It emits an ultrasound at 40 000 Hz (40kHz) which travels through the air and if ther..
0
1288
Frequent sanitisation of hand has become critical to be safe and healthy. As a preventive measure to tackle this situation, we have released the ..
1
3580
UTRAQ L100 is an ultra-compact POT(Patch on Top) GPS / NavIC module. UTRAC L100 NavIC is a standalone GNSS module in an SMT type based on ST high..
2
12345
Starting up with SIM7600EI 4G LTE Modem V2.0
SIM7600EI 4G LTE modem provides enhanced connectivity and speed with 4G technology. This is one of th..