AVR USB PROGRAMMER USBasp USBISP ISP for ATMEL ATMEGA ATTINY MICROCONTROLLERS

Product Code: AVR-USBasp
Availability: In Stock
Rs299.00 Rs249.00

10 or more Rs219.00
25 or more Rs209.00
50 or more Rs199.00
Qty:       

Package Contents

1 x AVR USBasp Programmer
1 x FRC Cable
1 x Container Box

Download Drivers, Software & User Manual from the links given below : 
Driver : http://www.elementzonline.com/downloads/USBasp/USBasp_win-driver.zip
AVRDude : http://www.elementzonline.com/downloads/USBasp/AVRDudeGUI.zip
User Manual : http://www.elementzonline.com/downloads/USBasp/USBasp_UserManual.pdf

Product Overview

USBasp programmer will allow you to painlessly transfer hex programs to most ATMEL AVR microcontrollers. It is more reliable than most other AVR programmers available. Entire AVR programmer has been built with using common parts and fits in the case of the serial connector. This AVR programmer is compatible with AVRdude GUI software.

- CAPABLE OF PROGRAMMING BOTH 3.3V & 5V MICROCONTROLLERS
- SET VCC-EN JUMPER FOR POWERING 5V TARGET BOARDS FROM USB PROGRAMMER ITSELF
- REMOVE VCC-EN JUMPER FOR POWERING TARGET BOARDS (3.3V/5V) FROM EXTERNAL POWER SUPPLY
- CAN BE USED TO BURN ARDUINO BOOTLOADER into ATMEGA ICs

This can be used to program :
AT90S1200,2313,2323,2343,4414,4433,4434,8515,8535, 
ATMEGA103,128,1280,1281,16,161,162,163,165,168,169, 
ATMEGA 2560,2561,32,323,325,3250,328,329,3290,406,48,64 
ATMEGA 640,644,645,6450,649,6490,8,8515,8535,88 
ATTINY 11,12,13,15,22,2323,25,26,261,28,44,45,461,84,85,86 
AT90CAN128,32,64 
AT90PWM2,3

Operating Voltage : 5V (Drawn from USB - No external power required)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good