This is a 0.96 inch OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. The package includes d..
PSoC 4 an ARM based PSoCPSoC 5LP programmer and debuggerPower supply systemBluetooth interfaceArduino compatible headersDigilent Pmod compatible heade..
Specifications:Input any USB Port Like: Computer/ Laptop/ Color TV/ Car/ Aeroplane/ Audio/ VideoCharging Time: 4 Hours (approx) on 5V-1AmpMicro USB In..
The Radxa ROCK 4C+ is a Single Board Computer (SBC) in a credit card sized form factor
packed with a wide range of class‑leading functionality, featu..
The Raspberry Pi 4 Model B is the latest addition to the popular Raspberry Pi range of computers, offers a significant increase in processor speed, ri..
STM32F0DISCOVERY helps to discover the STM32F0 Cortex-M0 features and to develop applications easily. It includes everything required for beginners an..
The current sensor chips: ACS712ELC-20Apin 5V power supply, on-board power indicatorthe module can measure the positive and negative 20 amps, corresponding to the analog output 100mV / Ano test current through the output voltage is VCC / 2PCB board size: 31 (mm) x13 (mm)..
QUICK OVERVIEW1.8V to 3.6V Supply VoltageLow power consumption – 0.5uA at 1HzI2C interfaceMax I2C Speed: 3.5MhzVery low noise – up to 0.02hPa (17cm)Fully calibratedPressure Range: 300hPa to 1100hPa (+9000m to -500m)..
3.3V power supplyOptical sensor: IR and red LED combined with photodetectorMeasures absorbance of pulsing bloodUltra-Low-Power Operation Increases Battery Life for Wearable DevicesHigh SNR Provides Robust Motion Artifact Resilience..
The basic concept of IR(infrared) obstacle detection is to transmit the IR signal(radiation) in a direction and a signal is received at the IR receiver when the IR radiation bounces back from a surface of the object.4 Channels IR Reflective Sensor (ER-SPS40201S) 4-way Infrared Tracking SensorThis 4 ..
Product OverviewThis is a triple axis accelerometer embedded module.Product Information
3-axis sensing
Small, low profile package
4 mm × 4 mm × 1.45 mm LFCSP
Low power : 350 μA (typical)
Single-supply operation: 1.8 V to 3.6 V
10,000 g shock survival
Excellent temperature stability..
Product InformationThis is an IoT kit based on the Arduino microcontroller board.Kit Contents
Arduino Uno R3 (Italy Made Original) – 1 nos.
USB A to B Cable – 1 nos.
ESP8266 – 1 nos.
LM35 temperature sensor – 1 nos.
LED – 2 nos.
Push button ..
Product InformationThis is an Arduino based IoT kit.Kit Contents
Uno R3 Compatible board – 1 nos.
USB A to B Cable – 1 nos.
ESP8266 – 1 nos.
LM35 temperature sensor – 1 nos.
LED – 2 nos.
Push button switch – 1 nos.
Male to Female jum..
Product Description
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functiESP8266 remote serial Port WI..
- Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.
The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrar..
Description:
It is a BLE (low energy bluetooth) module.
Features:
Bluetooth protocol: Bluetooth Specification V4.0 BLE receives no byte limit Iphone 4s under open environment and can achieve 110 m long distance communication
TI#39;s CC2541 chip configuration 256Kb space fol..
Details:
Model: OV7670
High sensitivity for low-light operation. Low operating voltage for embedded application
Standard SCCB interface compatible with I2C interface. Raw RGB, RGB (GRB4:2:2, RGB565/555/444),YUV(4:2:2) and YCbCr(4:2:2)output format
Support VGA, CIF and from CIF to 4..