Menu
Your Cart

Arduino Yun With PoE(Arduino-Italy)

Arduino Yun With PoE(Arduino-Italy)
Arduino Yun With PoE(Arduino-Italy)
Arduino Yun With PoE(Arduino-Italy)
Arduino Yun With PoE(Arduino-Italy)
Arduino Yun With PoE(Arduino-Italy)
Arduino Yun With PoE(Arduino-Italy)
Arduino Yun With PoE(Arduino-Italy)
  • Stock: In Stock
  • Brand: Arduino
  • Model: ARDUINO-YUN-POE
  • Weight: 100.00g
  • SKU: ARDUINO-YUN-POE
Products Sold: 0
Product Views: 17122
₹8999.00

Available Options

Product Overview

Arduino Yún is a microcontroller board based on the ATmega32u4 and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWRT named Linino. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a 3 reset buttons.

The Yún distinguishes itself from other Arduino boards in that it can communicate with the Linux distribution onboard, offering a powerful networked computer with the ease of Arduino. In addition to Linux commands like cURL, you can write your own shell and python scripts for robust interactions.

The Yún is similar to the Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Yún to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

The Bridge library facilitates communication between the two processors, giving Arduino sketches the ability to run shell scripts, communicate with network interfaces, and receive information from the AR9331 processor. The USB host, network interfaces and SD card are not connected to the 32U4, but the AR9331, and the Bridge library also enables the Arduino to interface with those peripherals.

Note:

There is no on-board regulator for voltages greater than 5VDC

It is recommended to power the board via the micro-USB connection with 5VDC

If you are powering the board though the Vin pin, you must supply a regulated 5VDC

It is preassembled with a POE module mounted on the board


Product Information

Arduino Yun Summary

  • ATmega32u4 Microcontroller    
  • 5V Operating Voltage    
  • 5V Input Voltage    
  • 20 Digital I/O Pins    
  • 7 PWM Channels    
  • 12 Analog Input Channels    
  • 40 mA DC Current per I/O Pin    
  • 50 mA DC Current for 3.3V Pin    
  • 32 KB Flash Memory (of which 4 KB used by bootloader)
  • 2.5 KB SRAM    
  • 1 KB EEPROM    
  • 16 MHz Clock Speed

Linux Microprocessor Summary

  • Atheros AR9331 Processor   
  • MIPS @400MHz Architecture   
  • 3.3V Operating Voltage   
  • 10/100Mbit/s Ethernet IEEE 802.3
  • IEEE 802.11b/g/n WiFi   
  • 2.0 Host/Device USB Type-A   
  • Micro-SD Card Reader only
  • 64 MB DDR2 RAM   
  • Flash Memory 16 MB
  • PoE compatible 802.3af card support    

Arduino Yun Dimension: Length 2.7", Width 2.1"

Arduino Yun Package: 1 x Arduino Yún with PoE


Write a review

Please login or register to review
Site uses Cookies
This site uses cookies to provide and improve your experience. By continuing to use this site, you agree to accept these cookies.